SYMPOZIUM B - TVÁŘENÍ KOVŮ

Datum: 21.05.2014

Místo konání: Kongresový sál B
13:30 - 17:15

13:30 - 14:00
B1   HODGSON Peter Deakin University, Wuarn Ponds Victoria, Australia
Advanced High Strength Steels (AHSS) for the automotive industry and generally multiphase steels such as DP (dual phase) and TRIP - VYŽÁDANÁ PŘEDNÁŠKA
14:00 - 14:15
B2   KODZHASPIROV Georgii St.Petersburg State Polytechnical University, St.Petersburg, Russian Federation
The Influence of Thermomechanical Processing Parameters on the Mesostructure Formation and Mechanical Properties - VYŽÁDANÁ PŘEDNÁŠKA
14:15 - 14:30
B3   TKOCZ Marek Silesian University of Technology, Katowice, Poland, EU
The Effect of Process Parameters on Press Load and Material Flow during Incremental Forming of Ribbed Parts
14:30 - 14:45
B4   LARIN Sergey Tula State University, Tula, Russian Federation
Isothermal Deformation of Dome-shaped Covers from Anisotropic Materials in the Creep Mode
14:45 - 15:00
B5   KLIBER Jiří VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Exquisite Recent Technologies of Materials Forming
15:00 - 15:15
B6   HOJNY Marcin AGH University of Science and Technology, Cracow, Poland, EU
Three-Dimensional Thermo-Mechanical Model with Variable Density in Application to Semi-Solid Rolling of Slabs
15:15 - 15:30
B7   SCHINDLER Ivo VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Model of Static Recrystallization in the Coarse-grained B2 Iron Aluminide - POSTER
COFFEE BREAK
15:45 - 16:00
B8   KUC Dariusz Silesian University of Technology, Katowice, Poland, EU
Plasticity and Microstructure of Magnesium - Lithium Alloys
16:00 - 16:15
B9   SOBOTKA Jiří Technical University of Liberec, Liberec, Czech Republic, EU
Utilization of Drop Test to Describe Viscoelastic Behavior of Lubricant
16:15 - 16:30
B10   ORLOV G.A. Ural Federal University, Ekaterinburg, Russian Federation
The Calculation of Stress in the Processing of Metals Forming
16:30 - 16:45
B11   ANDREYACHSHENKO Violetta Karaganda State Industrial University, Temirtau, Kazakhstan
The Design and Exploration of the Technology of Realization the Scheme of the Simple Shift with High Velocity of Deformation
16:45 - 17:00
B12   BANKS Kevin University of pretoria, Pretoria, South Africa
The Influence of Mn on Microstructure Evolution in Low C-high Nb-Ti Steels Subjected to Limited Roughing Strain
17:00 - 17:15
B13   MÁLEK Přemysl Charles University in Prague, Prague, Czech Republic, EU
The Influence of ECAP on Mechanical Properties of a Twin-roll Cast Al-Mn-Fe-Si-Zr Alloy
17:15 - 17:30
B14   GULIN Alexander Magnitogorsk State Technical University, Magnitogorsk, Russian Federation
The Possibility of Forming Ultra-Fine Grain Structure in Carbon Wire by Combination of Strain Effects

Datum: 22.05.2014

Místo konání: Kongresový sál B
9:00 - 11:00

09:00 - 09:15
B15   HORSKÝ Jaroslav Brno University of Technology, Brno, Czech Republic, EU
In-Line Heat Treatment of Long Products
09:15 - 09:30
B16   OLARU Paul National Research & Development Institute for Non-Ferrous and Rare Metals, Bucharest, Romania, EU
The Heat Flux and the Effects of Mould Shape on Distortion of the Mould in a Thin Slab Caster
09:30 - 09:45
B17   KARAMAN GENÇ Serhan Trakya University, Edirne, Turkey
The Effect of Thin Section Casting on the Hardness and Tensile Strength of GGG40
09:45 - 10:00
B18   KIREEVA Alena Tula state university, Tula, Russian Federation
Possibilities of Assembly Operations Intensication using Pulsed Magnetic Field
COFFEE BREAK
10:15 - 10:30
B19   SOLOMONOV Konstantin Moscow State University of Railway Engineering, Voronezh, Russian Federation
Elements of Algorithmization Calculation of Shaping Forgings
10:30 - 10:45
B20   HORSINKA Jaromír VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU
Optimalization of the Manufacturing Process of Forging with Flange
10:45 - 11:00
B21   DA SILVA Laurie Glasgow Caledonian University, Glasgow, United Kingdom, EU
A Review Paper on the Cold Roll bonding of AlSn Alloy/Steel Bimetal Strips

Datum: 23.05.2014

Místo konání: Kongresový sál B
9:00 - 10:45

09:00 - 09:15
B22   GROSMAN Franciszek Silesian University of Technology, Katowice, Poland, EU
A Study on Closed-die Forging aided by Shear Stress
09:15 - 09:30
B23   MIŁEK Tomasz Kielce University of Technology, Kielce, Poland, EU
Determine Parameters Hydromechanical Bulge Forming of Axisymmetric Components made from Copper Tubes
09:30 - 09:45
B24   YAKOVLEV Sergey Tula State University, Tula, Russian Federation
Rotary Drawing of Axisymmetric Parts of Complex Shape from Anisotropic Materials
09:45 - 10:00
B25   HADASIK Eugeniusz Silesian University of Technology, Katowice, Poland, EU
High-temperature Characteristics of Plasticity of Magnesium Alloys
COFFEE BREAK
10:15 - 10:30
B26   ZAHRADNÍK Radek Brno University of Technology, Brno, Czech Republic, EU
Improvement of Work Roll Service Life by Microstructure Simulation
10:30 - 10:45
B27   TURCZYN Stanislaw AGH University of Science and Technology, Cracow, Poland, EU
A Study on Design of Slitting Grooves Used for Rebar Rolling
10:45 - 11:00
B28   KRIVTSOVA Olga Karaganda state industrial university, Temirtau, Kazakhstan
Simulation of Stress Strain State of Rolling Rolls