SYMPOZIUM A - POKROKOVÁ VÝROBA ŽELEZA A OCELI

Datum: 21.05.2014

Místo konání: Modrý salonek
13:30 - 16:45

13:30 - 13:45
A1   TKADLEČKOVÁ Markéta VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Numerical Modeling of Solidification of Continuously Cast Steel Billets of Round Format with a Diameter of 130 mm - VYŽÁDANÁ PŘEDNÁŠKA
13:45 - 14:00
A2   KHAN Fareed Ashraf KTH. Royal Institute of Technology, Stockholm, Sweden, EU
Effects of Convection/stirring during Solidification of Cast Iron
14:00 - 14:15
A3   TRINKEL Verena Christian Doppler Laboratory for Anthropogenic Resources, Institute for Water Quality, Resource and Waste Management Technical University of Vienna, Vienna, Austria, EU
Distribution of Heavy Metals in Blast Furnace in- and Outputs with Respect to the Utilisation of Waste Plastics
14:15 - 14:30
A4   BERNASOWSKI Mikolaj AGH University of Science and Technology, Cracow, Poland, EU
Basic Structure of the Fuel Rate Optimization Model and Its Practical Use at the Blast Furnace Technology
14:30 - 14:45
A5   FELICIANO Cristobal Macquaire University, Sydney, Australia
Technological, Ecological and Economic Assessment of the Coke based Blast Furnace Operation with Charcoal Injection
14:45 - 15:00
A6   KROČA Lukáš Kovohutě Příbram nástupnická, a.s., Příbram, Czech Republic, EU
Utilization of Ironmaking and Steelmaking Wastes in Lead Recycling Technology
15:00 - 15:15
A7   GAUDE-FUGAROLAS Daniel Independent Research in Physical Metallurgy and Engineering, Vilassar de Mar, Spain, EU
On the Effectiveness of Baking as Hydrogen Embrittlement Reduction Treatment
15:15 - 15:30
A8   SONG Minho POSCO, Gwangyang, Korea, Republic of
Mechanism Study on Formation and Chemical Changes of Calcium Aluminate Inclusions Containing SiO2 in Ladle Treatment of Tool Steel
COFFEE BREAK
15:45 - 16:00
A9   GRYC Karel VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Determination of Solidus and Liquidus Temperatures in the Low Carbon Steel using Three Devices for High-temperature Thermal Analysis and Specialized Programs
16:00 - 16:15
A10   SOCHA Ladislav VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Verification of Physical Modelling of Steel Desulphurization in the Plant Conditions of the Homogenization Station
16:15 - 16:30
A11   HALFA Hossam Central Metallurgical R&D Ins, Cairo, Egypt
Behavior of Nitrogen-Rich Inclusions in New Developed 12 % Maraging Steel during “Active Slag” ESR Refining

Datum: 22.05.2014

Místo konání: Modrý salonek
9:00 - 10:45

09:00 - 09:15
A12   MACHOVČÁK Pavel VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU
The Development of a New Type of 90 Ton Forging Ingot
09:15 - 09:30
A13   JEZIERSKI Jan Silesian University of Technology , Gliwice, Poland, EU
Verification of the Theoretical Considerations and Numerical Modeling of the Powder Injection Process in Real Conditions of Pneumatic Injection of Ferroalloys into Liquid Cast Iron
09:30 - 09:45
A14   PICHLER Anton Montanuniversität Leoben, Leoben, Austria, EU
Influence of Alkali Metals on Mechanical Properties of Lumpy Iron Carrier during Reduction
09:45 - 10:00
A15   LI Baokuan Northeastern University of China, Shenyang, China
Modelling of Magnetohydrodynamic, Thermal and Solidified Behavior in Electroslag Remelting Process
COFFEE BREAK
10:15 - 10:30
A16   SMETANA Bedřich VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Important Aspects of Phase Transformations Temperatures Study of Steels by Use of Thermal Analysis Methods
10:30 - 10:45
A17   WRÓBEL Marek AGH, University of Science and Technology, Cracow, Poland, EU
Retrieval of Thermodynamic Data for Modelling of Solidification Using TQ Interface.

Datum: 23.05.2014

Místo konání: Modrý salonek
9:00 - 10:30

09:00 - 09:15
A18   MASARIK Miloš EVRAZ VÍTKOVICE STEEL, a.s., Ostrava, Czech Republic, EU
Causes of Occurrence of Internal and Surface Defects at Continuous Casting of Steel Slabs and Possibilities of Their Removal
09:15 - 09:30
A19   KORBÁŠ Martin VÍTKOVICE HEAVY MACHINERY a.s., Ostrava, Czech Republic, EU
Possibilities of Optimisation of Production of Tool Steel for Forging on the Rapid Forging Machine
09:30 - 09:45
A20   HODEK Josef COMTES FHT a.s., Dobřany, Czech Republic, EU
FEM Simulation Induction Heating Process
09:45 - 10:00
A21   STAWARZ Marcin Silesian University of Technology, Gliwice, Poland, EU
Thermal Effect of Phase Transformations in High Silicon Cast Iron
COFFEE BREAK
10:15 - 10:30
A22   HAMPL Jiří VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Application of Aluminum for Inoculation of Cast Iron